Waste Tyre Rubber Crushing Mill, Waste Tyre Rubber Crusher (XKP-560)
1. This machine is used for crushing rubber and plastic. The roll made of alloy chilled cast iron is better than those of common chilled cast iron.
2. The interior of the two rolls is empty and spray type. The temperature of roll surface is even.
3. To assure the safety, we install emergency pulling up equipment. Convenient range adjustment is set in manually operation. The safety shut down in manual operation is set, with the function of automatic crawl back swing the roll.
4. Convenient range adjustment is set in manually operation. The whole machine adopts channel-bottom head for convenient carrying and maintance.
| Technical parameter \ Type |
XKP-400 |
XKP-450 |
XKP-560 |
| Front roll diameter(mm) |
400 |
450 |
560 |
| Rear roll diameter(mm) |
400(Groove roller) |
450(Groove roller) |
510(Groove roller) |
| Working length of rolls(mm) |
600 |
650 |
800 |
| Front roll surface speed(m/min) |
17.32 |
23.2 |
25.56 |
| Friction ratio |
1: 1.38 |
1: 1.38 |
1: 1.30 |
| Max. nip(mm) |
8 |
8 |
15 |
| Motor power (kw) |
45 |
55 |
75 |
| dimension(L× W× H)(mm) |
3950× 1800× 1780 |
4770× 1846× 1835 |
5064× 2284× 1978 |
Packaging
Equipment painting completed before delivery, and then wrapped with stretch film, avoid rubbing the paint off the surface, wooden packaging can be customized, key parts, such as electronic control box, will be wrapped by shockproof packaging materials, and then packed in wooden cases.
FAQ
1. What does your factory do regarding quality control?
We pay much more importance to quality control from the very beginning to the end of production. Every machine will be fully assembled and carefully tested before shipment.
2. What's the machine quality guarantee?
Quality guarantee time is one year.We choose world famous brand components to keep our machine in perfect working condition.
3. Are you able to give installation and commissioning overseas?How long time will it take?
Yes, we can supply overseas service and technical support but customer needs to pay for the cost of the installation. Small machine usually takes within 2~3 days. Big production line usually takes about 30 days.
4. How can I trust you to deliver the right machine as I ordered?
We will absolutely deliver a good quality machine as we discussed and confirmed in the order. The core of our company culture is innovation,quality,integrity and efficiency. Also we have had many good cooperation with world famous rubber production manufacturers.
If you come to our factory, we can show the user around us.
5. How can we go to your side?
We are located in Qingdao City, Shandong province, China. The name of airport is Qingdao Jiaodong airport. We will pick up you at the airport.
Before leaving factory, this plate vulcanizing press needs to pass 24 hours' pressure test, pressure maintaining to test the bearing of the hydro-cylinder and piston stroke and guarantee no oil leakage and seeping to avoid unnecessary quality problems.
We can design and manufacture all kinds of non-standard plate vulcanizing press according to the customers' definite requirements.
Audited Supplier 
){kind=link}
){kind=link}