Rubber Mixing Mill with CE(XK-450)
1) The roll adopts the vanadium titanium metal alloy chilled cast iron and its surface is hard and wear-proof. The internal cavity is processed to make temperature well proportioned on the roll surface.
2) The machine is equipped with an overload protection device to prevent the main components from being damaged.
3) The machine is also equipped with an emergency brake device. When an emergent arises, just draw the safety pull rod, and the machine will stop immediately. It is safe and reliable.
4) The transmission system adopts a hardened tooth-surface reducer, which has a compact structure with higher transmission efficiency, lower noise and longer service life.
5) The base frame is a whole framework, which is convenient for installation.
6) Stock blender for direct rubber sheet and knife to cut as your need to assemble.
7) Auto-lubrication system for greese or oil and match bearing bush
Two Roll Rubber, Open Mixing Mill
1. The mixing mill is made of LTG-H alloy chilled cast iron
2. The open mixing mill speed reducing machine adopts hard tooth, its running noise is low and owns long life. This mixing mill adopts a special design of refining seal structure so that it can eliminate the leakage of lubricating oil.
3. Our Company specially designed the human-orientated machine, such as block rubber board and turbine tapping rubber device of open mixing mill can be used steam style; Open mixing mill operating system design in nearby working areas etc.
4. This mixing mill can be equipped with hydraulic or mechanical device which can automatically make the rubber material be mixed over and over again, so the labor intensity and mixing time can be reduced greatly.
5. The roll nip of the mixing mill can be adjusted by using manual or electrical mode
6. To ensure the safety of staff and equipment, we install convenient button for emergency.
7. All the mixing mills we provide to you are checked through 8 hours non-stop full load operation, customers can use them immediately after installation.
Rubber Mixing Mill with CE(XK-450)
| |
Item |
XK-160 |
XK-250 |
XK-360 |
XK-400 |
XK-450 |
XK-550 |
XK-560 |
XK-660 |
XK-710 |
| Roll diameter |
mm |
160 |
250 |
360 |
400 |
450 |
550 |
560-510 |
660 |
710 |
| Roll working length |
|
320 |
620 |
900 |
1000 |
1200 |
1500 |
1530 |
2130 |
2200 |
| Front roll linear speed |
r/min |
9 |
16.3 |
16.7 |
19.3 |
21.8 |
22.5 |
27.2 |
28 |
31.9 |
| Speed ratio of rolls |
|
01: 01.4 |
01: 01.1 |
01: 01.3 |
01: 01.3 |
01: 01.3 |
01: 01.2 |
01: 01.2 |
01: 01.2 |
01: 01.5 |
| Max roll space |
mm |
4.5 |
8 |
10 |
10 |
12 |
16 |
15 |
0.5-15 |
0.5-15 |
| Compound feeding capacity |
kg |
1-2 |
10-15 |
20-25 |
18-35 |
50 |
50-65 |
50-65 |
165 |
190 |
| Motor power |
kW |
5.5 |
18.5 |
30 |
45 |
55 |
110 |
90 |
240 |
280 |
| Dimensions(L× W× H) |
|
|
|
|
|
|
|
|
|
|
| L |
mm |
1133 |
2722 |
4200 |
4920 |
5405 |
6646 |
6270 |
7280 |
8185 |
| W |
mm |
920 |
1115 |
1780 |
1780 |
1740 |
2736 |
2282 |
3400 |
3910 |
| H |
mm |
1394 |
1345 |
1760 |
1800 |
1790 |
2105 |
2000 |
2530 |
2270 |
| Gross weight |
T |
~2 |
~3.2 |
~6.5 |
~8 |
~11.4 |
~22 |
~22.5 |
~49 |
~51 |
Packaging
Equipment painting completed before delivery, and then wrapped with stretch film, avoid rubbing the paint off the surface, wooden packaging can be customized, key parts, such as electronic control box, will be wrapped by shockproof packaging materials, and then packed in wooden cases.
FAQ
1. What does your factory do regarding quality control?
We pay much more importance to quality control from the very beginning to the end of production. Every machine will be fully assembled and carefully tested before shipment.
2. What's the machine quality guarantee?
Quality guarantee time is one year.We choose world famous brand components to keep our machine in perfect working condition.
3. Are you able to give installation and commissioning overseas?How long time will it take?
Yes, we can supply overseas service and technical support but customer needs to pay for the cost of the installation. Small machine usually takes within 2~3 days. Big production line usually takes about 30 days.
4. How can I trust you to deliver the right machine as I ordered?
We will absolutely deliver a good quality machine as we discussed and confirmed in the order. The core of our company culture is innovation,quality,integrity and efficiency. Also we have had many good cooperation with world famous rubber production manufacturers.
If you come to our factory, we can show the user around us.
5. How can we go to your side?
We are located in Qingdao City, Shandong province, China. The name of airport is Qingdao liuting airport. We will pick up you at the airport.
Our Services
♦ Our engineers can design target machines for customers and send them the drawing to confirm. We are always on the side of saving your cost.
♦ In the process of production, we will take photos and send to customers for their track the progress.
♦ Documents such as packing list, commercial invoice, and bill of lading etc. will be sent after the delivery.
♦ We could supply free English foundation DWG, installation drawing, user guide, maintenance manual and part drawing.
♦ We supply overseas engineer service and help to train your workers to operate the machine.
Audited Supplier 
){kind=link}
){kind=link}