High Quality Rubber Duplex Vulcanizing Press with Ce ISO
Vulcanizing Press, Vulcanizing Press, Duplex Vulcanizing Press XLB-D600X600X1/2.5MN
General Introduction of this duplex vulcanizing press:
The machine applies to sulfurizing various kinds of rubber and plastic model products as well as non-model products.
This press is designed with duplex pillar structure which can be operated and used alone or be used and operated together. When using this set of duplex press, 2 single presses won't influence each other. This plate vulcanizing machine is used in suppressing various kinds of rubber products, thermosetting plastic products and can also be used as common hydraulic press.
The press has simple structure, flexible operation, capacious space and beautiful appearance etc.
This press mainly consists of host machines, hydraulic system, and electronic control system. Fuel tank is installed on the side of host machines, won't be affected by the temperature of host machine plates. Workers can operate conveniently with capacious visual. Plate temperature is controlled by temperature control table, with high precision and good quality of products. All the parts are all according to ministry of chemical industry standard, using quality materials, with meticulously processed.
Working Process: Under the working hydraulic pressure, the embolism ascends to make hot plate close for getting pressure, while the embolism descends(namely hot plate turning on) by deadweight of hot plate, platform and embolism to drive working fluid to fuel reserve tank to achieve the aim of descending (namely turning on).
Made of nodular cast iron, the oil cylinder of machine is improved in compressive strength and wear resistance. Seal ring made of oil-proof rubber is placed in oil cylinder to have sealing effect in working process of this machine.
Combined oil pump, power source of the machine, provides working fluid with certain pressure. Working fluid enters into oil cylinder by control valve to make control handle on control valve turn to different places, and then embolism is able to ascend or descend.
Adopting tubular electric-heating component to heat up, the machine can reduce air pollution to keep workshop clean without boiler.
The machine is beautiful in shape, rational in structure, convenient in control, safe as well.
| Model |
XLB-600X600X1/2.50MN |
| Total Pressure (MN) |
2.5 |
| Hot Plate Specification (mm) |
600X600 |
| Daylight (mm) |
300 |
| Working Layer No. |
1 |
| Working Hydraulic Pressure (Mpa) |
20 |
| Mould Closing Speed(mm/s) |
12 |
| PistonStroke (mm) |
300 |
| Piston Diameter(mm) |
400 |
| Heating Mode |
Electric/Steam/Oil |
| Heating Temperature |
140-180degree Celsius |
| Motor Power (KW) |
15 |
| Control Mode |
Automatic PLC Control |
| Press Structure |
Pillar Type |
FAQ
1. Delivery time of the rubber machines?
This is specially designed machine according to your specific requirement.
From engineer designing to production completion, it needs about 25 to 35 days.
2. What does your factory do regarding quality control?
We pay much more importance to quality control from the very beginning to the end of production.
Every machine will be fully assembled and carefully tested before shipment.
3. What's the machine quality guarantee?
Quality guarantee time is one year.We choose world famous brand components to keep our machine in perfect working condition.
4. Are you able to give installation and commissioning overseas? How long time will it take?
Yes, we can supply overseas service and technical support but customer needs to pay for the cost of the installation.
Small machine usually takes within 2~3 days.
Big plant usually takes about 30 days.
5. How can I trust you to deliver the right machine as I ordered?
We will absolutely deliver a good quality machine as we discussed and confirmed in the order.
The core of our company culture is innovation, quality, integrity and efficiency. Also we have had much good cooperation with world famous rubber production manufacturers. If you come to our factory, we can show you're the user around us.
6. How can we go to your side?
We are located in Qingdao City, Shandong province, China. The name of airport is Qingdao Liuting airport.
We will pick up you at the airport.
Packaging
Equipment painting completed before delivery, and then wrapped with stretch film, avoid rubbing the paint off the surface, wooden packaging can be customized, key parts, such as electronic control box, will be wrapped by shockproof packaging materials, and then packed in wooden cases.
There are 15 experienced engineers and 108 skilled workers in our company, guaranteeing delivery on time as stipulated in the contract. At the same time, the company established a long-term cooperative relation with cosco, for ensuring the goods arriving port on time.
In addition, our rubber vulcanizing press have exported to America, Mexico, India, Vietnam, South Africa, Singapore, Malaysia, Indonisia, Australia, Sri Lanka and many other countries.
If you interested in our products mentioned above. Kindly let us know by return email. Then I will supply you with further information. Meanwhile, welcome to visit our factory!
Audited Supplier 
){kind=link}