Open Mixing Mill

• Customization: Available
• Model NO.: Rubber Mixer

Product Description

Lab Mixing Mill
 
Application:
This Lab Mixing Mill ensures the perfect and uniform blending of natural and synthetic rubber with other raw materials. The Lab Mixing Mill 
mixes all the raw materials to the desired specifications.
 
1. Lab Mixing Mill can be equipped with infrared, in order to ensure the safety of the operator.
2. We can produce electric heating, steam heating and water cooler rubber mixing mill.
3. The workers can operation the machine in front and back. Lab Mixing Mill is equipped with emergency stop devices below the machine
     which can stop at any time to meet an emergency situation, thus ensure the safety of personnel.
4. Can be equipped with manual and automatic hanging plastic device, ease of tapping and increase staff safety factor.
5. Protective cover can be equipped upward the roller, to ensure the safety of operating personnel.
 

Item	X(S)K-90	X(S)K-100	X(S)K-160
Roll Size	∮90X215	∮100X230	∮160X320
Roll Hardness	HRC50-55'	HRC50-55'	HRC50-55'
Roll Friction Ratio	1 .22	1:1.22	1;1.35
Front Roll Speed	19.6r/min	19.6r/min	17.85r/min
Rollers Spacing	0-3mm	0-3mm	0-4mm
Capacity Per Patch	0.5-1 Kg	1-5 Kg	1-15 Kg
Motor Power	3	1.5/3	5.5
Overall Dimension (L x W x L)	1200mm×750mm×1500mm	1400mm×650mm×1500mm	1500mm×750mm×1500mm
Remark	1.Electric heating can adjust temperature between room temperature to 220ºC. 2. Bearing type drive. 3. Sealed by high temperature resistance seals, eliminating oil leakage.

Rubber Mixing Mill
 
Introduction:
This Rubber Mixing Mill ensures the perfect and uniform blending of natural and synthetic rubber with other raw materials. The Rubber Mixing Mill mixes all the raw materials to the desired specifications.
 
Technical Parameter:

Model	XK-550B	XKY-610	XK-660	XKY-660	XKY-710
Roll Diameter(mm)	¢550	¢610	¢660	¢660	¢710
Roll Working Diameter(mm)	1500	1830	2130	2130	2200
Front Roll Speed(m/min)	28.32	30	28.13	32	32.53
Fraction Ratio of front/back Roll	1:1.22	1:1.09	1:1.24	1:1.09	1:1.09
Remark	Available rolls types: cored smooth roll, cored fluted roll, circumferentially drilled smooth roll.
Instruction	We can design different types according to the clients detailed requirements for this series of mill, for example: equipped with to and fro type stock blender, five fingers type stock blender, manual rubber cutter, pneumatic controlled rubber cutter and hydraulic stock guide.

Rubber Mixing Mill
 
Application:
 
This Rubber Mixing Mill ensures the perfect and uniform blending of natural and synthetic rubber with other raw materials. The Rubber Mixing Mill mixes all the raw materials to the desired specifications.
 
Advantageous Features:
 
1. This Rubber Mixing Mill can be equipped with hydraulic or mechanical device which can automatically make the rubber material be mixed over and over again. So the labor intensity and mixing time can be reduced greatly.
2. The mixing mill speed reducer is planetary speed reducer, it is low noise, high efficiency, good transfer effect,
3. To ensure the safety of staff and equipment, we install convenient button for emergency.
4. All the Rubber Mixing Mills we provide to you are checked after 3-7 hours non-stop full load operation, perfect quality and low noise. Customers can use them immediately after installation.
 
 

Mode	XK-160	XK-230	XK-250	XK-300	XK-360	XK-400	XK-450	XK-560	XK-550B	XK-660
Working Diameter of Rolls (mm)	160	230	250	300	360	400	450	560/510	550	660
Working Length of Rolls (mm)	320	615	620	750	900	1000	1200	1530	1500	2130
Front Roll Surface Speed (m/min)	8.95	10.21	14.1	15.1	16.25	18.65	24.26	27.72	27.94	28.6
Friction Ratio	1:1.35	1:1.19	1:1.17	1:1.25	1:1.25	1:1.27	1:1.27	1:1.2	1:1.22	1:1.24
Max. nip (mm)	4.5	7	8	10	10	10	15	15	15	15
Capacity per Batch (kg)	1-2	6-10	8~15	15~20	20~25	18-35	25-50	35~50	50~60	165
Motor Power (KW)	5.5	15	18.5	22	30	37	55	90	110	245
Dimensions: (L × W × H)(mm)	1380×860 ×1320	2400×1000 ×1400	3400×1500 ×1500	3400×1500 ×1550	3780×1850 ×1750	4350×1850 ×1785	5200×2380 ×1840	5845×2284 ×1978	5870×2475 ×2045	7465×3662 ×2080

Open Mixing Mill
 
Application:
 
This Open Mixing Millensures the perfect and uniform blending of natural and synthetic rubber with other raw materials. The Open Mixing Mill mixes all the raw materials to the desired specifications.
 
Advantageous Features:
 
1. This Open Mixing Mill can be equipped with hydraulic or mechanical device which can automatically make the rubber material be mixed over and over again. So the labor intensity and mixing time can be reduced greatly.
2. The Open Mixing Millspeed reducer is planetary speed reducer, it is low noise, high efficiency, good transfer effect,
3. To ensure the safety of staff and equipment, we install convenient button for emergency.
4. All the Open Mixing Millswe provide to you are checked after 3-7 hours non-stop full load operation, perfect quality and low noise. Customers can use them immediately after installation.
 

Mode	XK-160	XK-230	XK-250	XK-300	XK-360	XK-400	XK-450	XK-560	XK-550B	XK-660
Working Diameter of Rolls (mm)	160	230	250	300	360	400	450	560/510	550	660
Working Length of Rolls (mm)	320	615	620	750	900	1000	1200	1530	1500	2130
Front Roll Surface Speed (m/min)	8.95	10.21	14.1	15.1	16.25	18.65	24.26	27.72	27.94	28.6
Friction Ratio	1:1.35	1:1.19	1:1.17	1:1.25	1:1.25	1:1.27	1:1.27	1:1.2	1:1.22	1:1.24
Max. nip (mm)	4.5	7	8	10	10	10	15	15	15	15
Capacity per Batch(kg)	1-2	6-10	8~15	15~20	20~25	18-35	25-50	35~50	50~60	165
Motor Power (KW)	5.5	15	18.5	22	30	37	55	90	110	245
Dimensions: (L × W × H)(mm)	1380×860 ×1320	2400x1000 1400	3400×1500 ×1500	3400×1500 ×1550	3780×1850 ×1750	4350×1850 ×1785	5200×2380 ×1840	5845×2284 ×1978	5870×2475 ×2045	7465×3662 ×2080

 
Rubber Warming Mill

Application:

This Rubber Warming Mill ensures the perfect and uniform blending of natural and synthetic rubber with other raw materials. The Rubber Warming Mill mixes all the raw materials to the desired specifications.

Mode	XK-160	XK-230	XK-250	XK-300	XK-360	XK-400	XK-450	XK-560	XK-550B	XK-660
Working Diameter of Rolls(mm)	160	230	250	300	360	400	450	560/510	550	660
Working Length of Rolls n(mm)	320	615	620	750	900	1000	1200	1530	1500	2130
Front Roll Surface Speed (m/min)	8.95	10.21	14.1	15.1	16.25	18.65	24.26	27.72	27.94	28.6
Friction Ratio	1:1.35	1:1.19	1:1.17	1:1.25	1:1.25	1:1.27	1:1.27	1:1.2	1:1.22	1:1.24
Max. nip (mm)	4.5	7	8	10	10	10	15	15	15	15
Capacity per Batch (kg)	1-2	6-10	8~15	15~20	20~25	18-35	25-50	35~50	50~60	165
Motor Power (KW)	5.5	15	18.5	22	30	37	55	90	110	245
Dimensions: (L × W × H)(mm)	1380×860 ×1320	2400×1000 1400	3400×1500 ×1500	3400×1500 ×1550	3780×1850 ×1750	4350×1850 ×1785	5200×2380 ×1840	5845×2284 ×1978	5870×2475 ×2045	7465×3662 ×2080

Rubber Mixer
Application:
This rubber mixing machine ensures the perfect and uniform blending of natural and synthetic rubber with other raw materials. The Rubber Mixer mixes all the raw materials to the desired specifications.

Advantageous Features:

1. This Rubber Mixercan be equipped with hydraulic or mechanical device which can automatically make the rubber material be mixed and over again. So the labor intensity and mixing time can be reduced greatly.
2. The roll nip of the mixing mill be adjusted using manual or electrical mode.
3. To ensure the safety of staff and equipment, we install convenient button for emergency.
4. All the Rubber Mixersis we provide to you are checked after 8 hours non-stop full load operation, perfect quality and low noise. Customers can use them immediately after installation.
5. Automatic temperature and time control system, high mixing performance, uncompromising quality, easy installation and maintenance

Mode	XK-160	XK-230	XK-250	XK-300	XK-360	XK-400	XK-450	XK-560	XK-550B	XK-660
Working Diameter of Rolls (mm)	160	230	250	300	360	400	450	560/510	550	660
Working Length of Rolls (mm)	320	615	620	750	900	1000	1200	1530	1500	2130
Front Roll Surface Speed (m/min)	8.95	10.21	14.1	15.1	16.25	18.65	24.26	27.72	27.94	28.6
Friction Ratio	1:1.35	1:1.19	1:1.17	1:1.25	1:1.25	1:1.27	1:1.27	1:1.2	1:1.22	1:1.24
Max. nip (mm)	4.5	7	8	10	10	10	15	15	15	15
Capacity per Batch(kg)	1-2	6-10	8~15	15~20	20~25	18-35	25-50	35~50	50~60	165
Motor Power (KW)	5.5	15	18.5	22	30	37	55	90	110	245
Dimensions: (L × W × H)(mm)	1380×860 ×1320	2400×1000 ×1400	3400×1500 ×1500	3400×1500 ×1550	3780×1850 ×1750	4350×1850 ×1785	5200×2380 ×1840	5845×2284 ×1978	5870×2475 ×2045	7465×3662 ×2080