Rubber Kneader, Rubber Mixer, Rubber kneader machine
| Item |
3L |
5L |
10L |
20L |
25L |
35L |
55L |
75L |
110L |
150L |
200L |
| Total Volume of Mixing Chamber (L) |
8 |
15 |
25 |
45 |
55 |
75 |
125 |
170 |
250 |
325 |
440 |
| Working Volume of Mixing Chamber (L) |
3 |
5 |
10 |
20 |
25 |
35 |
55 |
75 |
110 |
150 |
200 |
| Driving Motor Power (KW) |
5.5 |
11 |
22 |
37 |
37 |
55 |
75 |
110 |
185 |
220 |
280 |
| Tilting Motor Power (KW) |
0.55 |
1.1 |
1.1 |
1.5 |
1.5 |
2.2 |
3 |
4 |
5.5 |
11 |
11 |
| Tilting Angle (°) |
140 |
140 |
140 |
140 |
140 |
140 |
140 |
140 |
140 |
135 |
135 |
| Rotational Speed of the Rotor (Front/Rear) (RPM) |
32/24.5 |
32/23.5 |
32/25 |
32/27 |
32/27 |
30/24.5 |
30/24.5 |
30/24.5 |
30/24.5 |
30/24.5 |
30/24.5 |
| Pressure of Compressed Air (MPa) |
0.5~0.8 |
0.6~0.8 |
0.5~0.8 |
0.6~0.8 |
0.6~0.8 |
0.5~0.8 |
0.6~0.8 |
0.6~0.8 |
0.6~0.8 |
0.6~0.8 |
0.6~0.8 |
| Capacity of Compressed Air (m³/min) |
≥0.3 |
≥0.5 |
≥0.5 |
≥0.7 |
≥0.7 |
≥0.9 |
≥1.0 |
≥1.0 |
≥1.5 |
≥2.0 |
≥4.0 |
| Pressure of Cooling Water (Rubber Mixing) (MPa) |
0.2~0.4 |
0.2~0.4 |
0.2~0.4 |
0.2~0.4 |
0.2~0.4 |
0.3~0.4 |
0.3~0.4 |
0.3~0.4 |
0.3~0.4 |
0.3~0.4 |
0.3~0.4 |
| Pressure of Heating Steam (Plastic Mixing)(MPa) |
0.5~0.8 |
0.5~0.8 |
0.5~0.8 |
0.5~0.8 |
0.5~0.8 |
0.5~0.8 |
0.5~0.8 |
0.5~0.8 |
0.5~0.8 |
0.5~0.8 |
0.5~0.8 |
1 Mixing chamber
It is high-quality steel plate welded. It composed of the body and two side panels. Using of jacket structure for cooling or heating used. Inner face Chrome-plated
2 Thermal Resistance
Mixing chamber underside central with a plug-in thermal resistance, with PLC, Detection, control, is mixing temperature.
3 Rotor
It is similar with banbury rotor. Rotor axis central have hole communicate with the wing, forming of cooling and heating channels. Arises peak and the end surface welded wear-resistant carbide, through hard chrome plating after polishing.
4 Heating and cooling systems
A common set of piping systems, cooling water or heating steam in three columns to pass into the rotor wing, mixing chamber and ram room, circulating cooling or heating for the Materials.
5 Dust stop
Using rotor shaft and the end surface three defense lines floating oil film sealing, Durable and completely solve the problem of leaking powder.
6 Main transmission systems
Including the main motor, reducer, the speed ratio gear box, two rotors is the opposite differential rotation speed.
7 Gas control system
Including the PLC order control, two-way cylinder to drive the ram lift and down. When mixing overload, the ram automatically go up to protect motor.
8. Electronic control system
Used import PLC device, all imported electrical components or introduced technology products improve system reliability.
Audited Supplier 
){kind=link}