Mini Two Roll Mixing Mill, Laboratory Rubber Mixing Mill
Laboratory Rubber Mixing Mill(electricity heating)
(1) Roller is made from cast iron, wear resistance and long service life. Internal water cooling system, it can use steam heating or electrical heating. The temperature difference between rollers can be controlled in 2 degrees or minus. The rollers surface through mirror polishing processing.
(2) The space between rollers is having manual and electric adjust ice two kinds.
(3) Frame is made by steel plate welding, so have good rigidity structure, and beautiful appearance after annealing and eliminating inside stress.
(4) Bedplate is as a whole structure, using steel welding operation and has high stability.
(5) Bushing is used the bearing-type bussing, lined with high-strength bearings, forced closed lubrication system to ensure it does not leak oil during the operation of the machine.
(6)The brake system use the perfect emergency stop setting, can maximum guarantee the safety of the staff and equipment use
(7) The gear of reduction gearbox use cylinder-shaped, hard tooth surface is 20CrMiTi, through quenching and carburizing processing, hardness is HRC57.
(8) Splice plate: Clear mixture device designed, easy to clean.
(9) High design: Humanization, reduce the labor intensity of the operator.
(10) After the completion of the machine assembly, the machine passed load test within 4-6 hours, reducing the debugging expense and time for the customers.
| Roll Diameter |
160mm |
| Roll Working Length |
320mm |
| Roll Hardness |
50-60HRC |
| Front Roll Linear Speed |
8.95m/min |
| Ratio before and after roll |
1: 1.35 |
| Roll Range |
0--4.5 mm |
| Minimum thickness of the tablets |
0.3mm |
FAQ
1. What does your factory do regarding quality control?
We pay much more importance to quality control from the very beginning to the end of production. Every machine will be fully assembled and carefully tested before shipment.
2. What's the machine quality guarantee?
Quality guarantee time is one year.We choose world famous brand components to keep our machine in perfect working condition.
3. Are you able to give installation and commissioning overseas?How long time will it take?
Yes, we can supply overseas service and technical support but customer needs to pay for the cost of the installation. Small machine usually takes within 2~3 days. Big production line usually takes about 30 days.
4. How can I trust you to deliver the right machine as I ordered?
We will absolutely deliver a good quality machine as we discussed and confirmed in the order. The core of our company culture is innovation,quality,integrity and efficiency. Also we have had many good cooperation with world famous rubber production manufacturers.
If you come to our factory, we can show the user around us.
5. How can we go to your side?
We are located in Qingdao City, Shandong province, China. The name of airport is Qingdao Jiaodong airport. We will pick up you at the airport.
Before leaving factory, this plate vulcanizing press needs to pass 24 hours' pressure test, pressure maintaining to test the bearing of the hydro-cylinder and piston stroke and guarantee no oil leakage and seeping to avoid unnecessary quality problems.
We can design and manufacture all kinds of non-standard plate vulcanizing press according to the customers' definite requirements.
Audited Supplier 
){kind=link}