Hydraulic Rubber Kneader / internal mixer (X(S)-75LX30)
X(S)N-3L 10L 20L 35L 55L 75L 110L as clients requirements to produce
1. Mixing chamber:
It consists of a "W" shape body and the surfacing at the base is welded from the highly wear-resisting hard alloy ,to achieve the wear resistance ,two side boards made of high quality steel plates by means of extrusion forming and welding, which are jacked to take the flow of cooling water or steam. It is plated with hard chrome on its internal walls.
2.Thermal Resistance:
There is a plug-in thermal resistance in middle section of the bottom of the chamber to be connected to electrical system to inspect and display the temperate.
3.Rotor:
It is designed to the hollow blades of Banbury type. The hollows are connected with axial hole of rotor shaft used as cooling or heating passage. The top edges of blades and the end faces of ~ rotor shaft are surface welded with cobalt-base hard alloy and grinding, then plating with hard chrome and polishing.
We use the original production of Wafangdian bearings.(Top class products in China market)
4.Pressing System
The upper ram weight is in hump design; the weight keeps in close contact with the blade peak of the rotor; there is no mixing dead space in the mixing chamber, so as to improve the mixing rubber property.
The working surface of the upper ram is treated with chromium plating; the inner chamber is installed with the heating and cooling channel; and can be cooled or heated according to the process requirements; it is also equipped with the anti-dust cover; based on the combination between the anti-dust cover and the dust-absorbing pipeline above the mixingchamber, the dust explosion can be reduced accordingly.
5.Cooling/heating system:
A common piping system is adopted for either cooling or heating material in mixing operation. Through the system cooling water or steam is fed in three ways to the cavities of the rotors blades, the mixing chamber and the top ram.
6.Tilting mechanism:
It consists of a rotor with brake, cycloidal gear reducer, TP type worm and worm gear, etc.. It is able to actuate the mixing chamber tilting by 140° around the front rotors.
7.Dust sealing device:
At the joint between the top of the mixing chamber and the cantilevered arm of the machine frame, the dust sealing assemblies with curved slotted partings are used obtaining an excellent and reliable sealing purpose.
The end face of the rotor is sealed by end contact sealing with nor oil-lubrication and is seals well and is wear-resistant and durable.
8.Main driving system:
The part is made up with main motor, reducer, connecting gears. It realizes odd-speed rotation of the rotors with running face one other.
9.the reducer:
We use the hardened-gear reducer which specialized for roll-over mixer, it ensures the abrasion resistance, while keeps the gear toughness.
10.Pneumatic control system:
Pneumatic control system is controlled by XG order. The bi-directional air cylinder makes the ram up or down. In case the over load occurs in the mixing chamber, the top ram can be raised automatically or manually if necessary, so as to protect motor from overload.
11.Electric control system:
Imported PLC device and electric control components which are all imported products or imported technology products are adopted in the electric control system as to raise control reliability.
Also except PLC control, the mixing chamber can be tilting by manual,when power cut,the material can be dump out by manual.
Type |
X(S)N-35L |
X(S)N-55L |
X(S)N-75L |
X(S)N-110L |
| Total volume of mixing chamber (L) |
75 |
125 |
180 |
250 |
| Working volume of mixing chamber (L) |
35 |
55 |
75 |
110 |
| Rotational speed of the rotor(front) (r/min) |
36 |
36 |
36 |
30 |
| Rotational speed of the rotor(rear) (r/min) |
30 |
30 |
30 |
24.5 |
| Driving motor power (KW) |
55 |
75 |
110 |
185 |
| Tilting angle |
110° |
110° |
110° |
110° |
| Size: Length× Width× Height |
3150× 1900× 2880 |
3280× 2120× 3090 |
3250× 2120× 3250 |
4075× 2712× 3580 |
Packaging
Equipment painting completed before delivery, and then wrapped with stretch film, avoid rubbing the paint off the surface, wooden packaging can be customized, key parts, such as electronic control box, will be wrapped by shockproof packaging materials, and then packed in wooden cases.
FAQ
1. What does your factory do regarding quality control?
We pay much more importance to quality control from the very beginning to the end of production. Every machine will be fully assembled and carefully tested before shipment.
2. What's the machine quality guarantee?
Quality guarantee time is one year.We choose world famous brand components to keep our machine in perfect working condition.
3. Are you able to give installation and commissioning overseas?How long time will it take?
Yes, we can supply overseas service and technical support but customer needs to pay for the cost of the installation. Small machine usually takes within 2~3 days. Big production line usually takes about 30 days.
4. How can I trust you to deliver the right machine as I ordered?
We will absolutely deliver a good quality machine as we discussed and confirmed in the order. The core of our company culture is innovation,quality,integrity and efficiency. Also we have had many good cooperation with world famous rubber production manufacturers.
If you come to our factory, we can show the user around us.
5. How can we go to your side?
We are located in Qingdao City, Shandong province, China. The name of airport is Qingdao Jiaodong airport. We will pick up you at the airport.
Before leaving factory, this plate vulcanizing press needs to pass 24 hours' pressure test, pressure maintaining to test the bearing of the hydro-cylinder and piston stroke and guarantee no oil leakage and seeping to avoid unnecessary quality problems.
We can design and manufacture all kinds of non-standard plate vulcanizing press according to the customers' definite requirements.
Audited Supplier 
){kind=link}