Laboratory Rubber Mixing Mill, Lab Mixing Mill, Open Mixing Mill, Two Roller Mill XK-160
Qingdao Shun Cheong Machinery Co., Ltd.
1. Founded in 1998, 17 years experience for manufacturing rubber machines.
2. 10 experienced engineers for complete considerations of every customer.
3. 3D software for auxiliary design. Show every design details in front of you.
4. Experienced technicians for production, installation, commissioning & service.
5. ISO 9001:2015 and CE certified company.
6. All machines' composition parts machined through professional CNC machining with strict quality control procedure.
specification
USE:
This machine is mainly used in Rubber & Plastic Product factory for Natural Rubber Mixing(plasticating), Raw Rubber and Compound mixing, rubber warm-up mixing and pressing sheet.
Our ZQ reducer Rubber Mixing Mill Photos as Below:
ZQ: Nylon bush with grease lubricating system
Nylon bush grease LUB by manual, with machine noise, easy broken. ZQ reducer is the common ones of rubber mixing mill.
Our ZSYF Gear Reducer Open Mixing Mill as follow:
ZSYF: Automatic Bearing Thin Oil Lubrication System:
We adopt the ZSYF series hard gear reducers to be matched with our rubber mixing mills. The gear lubrication adopts thin oil pump lubrication (forced recycled spray type) equipped with outside cooler to cool off the lubrication oil. The reducer is also equipped with lubrication oil filter.
1.The gear employs high-strength low-carbon alloy steel carbureted, quenched and ground, with hardness of gear flank of HRC58-62, high precision and good contact.
2. High drive efficiency: >90%.
3. Stable operation, low noise.
4. Compact, light weight, durable lifetime, high carrying capacity.
5. Easy to dismantle, repair and install .
1. Machine frame, gland and base are all welded through steel plates, after annealing, completely processed by precise machine tool. The whole machine frame, gland and base are all of strong rigidity, won't deform and the surface is smooth and anti-wear.
2. The 2 ends of the rolls adopt double roller rolling aligning bearings. Bearings adopt automatic thin oil lubrication system. Roll Bearings adopt automatic thin oil lubrication style.
3. Rollers cooling water adopt copper rotary joints. Rollers are made of chilled cast iron, front and rear rollers are hollow type, so as to achieve better temperature control effect, the working surface hardness is 68 ~ 72HSD.
4. Reducer adopts square ZSYF355 hard tooth gear reducer, 6 grade precision, very low noise, long service life.
5. Roller bearings: High precision self-aligning roller bearings.
6. Emergency Brake Equipment: In front and rear of the machine are equipped with 4 emergency stopping buttons and also in the mill base is equipped a Kick-style stop switch.
7. This rubber mixing machine adopts split type steel stop guides.
8. Equipment safety devices. To protect the machine main parts from damage, the machine is connected with safety pads protection device. When the machine is overloaded, the safety disc will rupture protecting the main parts of the equipment from damage.
9. Our electric control device is mainly composed of electric motor, brake solenoid, limit switches and electrical controlling. This device is installed on the machine base (including electric controlling system) along with the machine packed and transported together. Before the machine leaving the factory, the wire from the motor to electric control cabinet is connected. The customer only needs to connect the control cabinet wire to the power supply before using the machine.
Mode |
XK-160 |
XK-230 |
XK-250 |
XK-300 |
XK-360 |
XK-400 |
XK-450 |
XK-560 |
XK-550B |
XK-660 |
working diametetr of rolls
(mm) |
160 |
230 |
250 |
300 |
360 |
400 |
450 |
560/510 |
550 |
660 |
working length of rolls
(mm) |
320 |
600 |
620 |
750 |
900 |
1000 |
1200 |
1530 |
1500 |
2130 |
front roll surface speed
(m/min) |
8.95 |
10.21 |
14.1 |
15.1 |
16.25 |
18.65 |
24.26 |
27.72 |
27.94 |
28.6 |
| Rfiction ratio |
1: 1.35 |
1: 1.19 |
1: 1.17 |
1: 1.25 |
1: 1.25 |
1: 1.27 |
1: 1.27 |
1: 1.2 |
1: 1.22 |
1: 1.24 |
Max. nip
(mm) |
4.5 |
7 |
8 |
10 |
10 |
10 |
15 |
15 |
15 |
15 |
| Capacity per batch(kg) |
1-2 |
6-10 |
8~15 |
15~20 |
20~25 |
18-35 |
25-50 |
35~50 |
50~60 |
165 |
Motor power
(kw) |
5.5 |
15 |
18.5 |
22 |
30 |
37 |
55 |
90 |
110 |
245 |
Dimensions:
L × W × H(mm) |
1380× 860
× 1320 |
2800× 1200
× 1120 |
3400× 1500
× 1500 |
3400× 1500
× 1550 |
3780× 1850
× 1750 |
4350× 1850
× 1785 |
5200× 2380
× 1840 |
5845× 2284
× 1978 |
5870× 2475
× 2045 |
7465× 3662
× 2080 |
| Keyword |
Rubber Mixing Mill, Rubber Mixer, Rubber Machine, Rubber Mixing Machine |
customers visiting
Audited Supplier 
){kind=link}