XKP-610 New Advanced Waste Tire Recycling Line
1. Application:
Mainly used to crack 40-50mm rubber granules into rubber powder.
2. Structure:
01. Machine body
This machine is mainly consists of the body parts, transmission parts, safety device, temperature adjusting device, lubricating system and accident parking equipment etc.
02. Rollers
Front and rear rollers are the main working parts of the machine, through the motor, speed reducer drive, running relatively in a certain ratio. Surface of the roller is made of chilled cast iron, hard and wear-resistant. Roller ends are supported with sliding bearing, using dry oil cup filling lubrication on a regular basis. Distance between two roll within the prescribed scope can be adjusted.
03. Safety device
The machine is with safety device, safety pad will be damaged in order to protect the main parts when overload.
04. Stop Guide
Stock guide is equipped on both ends of the rollers. Pulling the emergency device, the machine could be stop immediately when accident occurs.
05. Rolls cooling method
Roller is equipped with internal cooling device, which is used to adjust the roller surface temperature.
06. Installation and commissioning, following the instruction book.
Our factory is one of the big manufactures for rubber machines in China for more than 40 years. The mainly products are plate vulcanizing press, rubber kneader, two-roll mixing mill, tyre retreading machine, conveyor belt vulcanizing press, rubber tile vulcanizing press and so on. We also can design and manufacture all kinds of non-standard rubber machinery according to the requirements of the customers. We can ensure the quality and give you the best reasonable price.
In the additional, our machineries have exported to America, Mexico, India, Vietnam, South Africa, Singapore, Malaysia, Indonisia, Australia, Sri Lanka and many other countries
If you interested in our products mentioned above. Kindly let us know by return email. Then I will supply you with further information. Meanwhile, welcome to visit our factory!
| Technical parameter \ Type |
XKP-400 |
XKP-450 |
XKP-560 |
| Front roll diameter(mm) |
400 |
450 |
560 |
| Rear roll diameter(mm) |
400(Groove roller) |
450(Groove roller) |
510(Groove roller) |
| Working length of rolls(mm) |
600 |
650 |
680 |
| Front roll surface speed(m/min) |
17.32 |
23.2 |
25.56 |
| Friction ratio |
1:1.38 |
1:1.38 |
1:1.30 |
| Max.nip(mm) |
8 |
8 |
15 |
| Motor power (kw) |
45 |
55 |
75 |
| dimension(L x W x H)(mm) |
3950x800x1780 |
4770x1846x1835 |
5064x2284x1978 |
Packaging
Equipment painting completed before delivery, and then wrapped with stretch film, avoid rubbing the paint off the surface, wooden packaging can be customized, key parts, such as electronic control box, will be wrapped by shockproof packaging materials, and then packed in wooden cases.
FAQ
1. What does your factory do regarding quality control?
We pay much more importance to quality control from the very beginning to the end of production. Every machine will be fully assembled and carefully tested before shipment.
2. What's the machine quality guarantee?
Quality guarantee time is one year.We choose world famous brand components to keep our machine in perfect working condition.
3. Are you able to give installation and commissioning overseas?How long time will it take?
Yes, we can supply overseas service and technical support but customer needs to pay for the cost of the installation. Small machine usually takes within 2~3 days. Big production line usually takes about 30 days.
4. How can I trust you to deliver the right machine as I ordered?
We will absolutely deliver a good quality machine as we discussed and confirmed in the order. The core of our company culture is innovation,quality,integrity and efficiency. Also we have had many good cooperation with world famous rubber production manufacturers.
If you come to our factory, we can show the user around us.
5. How can we go to your side?
We are located in Qingdao City, Shandong province, China. The name of airport is Qingdao liuting airport. We will pick up you at the airport.
Our Services
♦ Our engineers can design target machines for customers and send them the drawing to confirm. We are always on the side of saving your cost.
♦ In the process of production, we will take photos and send to customers for their track the progress.
♦ Documents such as packing list, commercial invoice, and bill of lading etc. will be sent after the delivery.
♦ We could supply free English foundation DWG, installation drawing, user guide, maintenance manual and part drawing.
♦ We supply overseas engineer service and help to train your workers to operate the machine.
Audited Supplier 
){kind=link}