rubber cracker, rubber crusher XKP-560
1. This machine is used for crushing rubber and waste tires. The rolls are made of alloy chilled cast iron is better than those of common chilled cast iron.
2. The interior of the two rolls is empty and spray type. The temperature of roll surface is even.
3. To assure the safety, we install emergency pulling up equipment. Convenient range adjustment is set in manually operation. The safety shut down in manual operation is set, with the function of automatic crawl back swing the roll.
4. This rubber crusher adopts hard tooth gear reducer with higher working efficiency, very low noise and longer service life.
Technical parameter \ Type |
XKP-400 |
XKP-450 |
XKP-560 |
Front roll diameter(mm) |
400 |
450 |
560 |
Rear roll diameter(mm) |
400(Groove roller) |
450(Groove roller) |
510(Groove roller) |
Working length of rolls(mm) |
600 |
650 |
800 |
Front roll surface speed(m/min) |
17.32 |
23.2 |
25.56 |
Friction ratio |
1: 1.38 |
1: 1.38 |
1: 1.30 |
Max. nip(mm) |
8 |
8 |
15 |
Motor power (kw) |
45 |
55 |
75 |
dimension(L× W× H)(mm) |
3950× 1800× 1780 |
4770× 1846× 1835 |
5064× 2284× 1978 |