Professional Waste Tire Recycling Plant/ Used Tire Rubber Powder Production Line
High Automatic Waste Tyre Recycling Process:
Waste Tires-→Single Hook Debeader-→Tire Cutter-→Whole Tire Shredder-→Rubber Crusher -→Screen, Conveyor Belt, Magnetic Plants-→Fiber Separator -→Fine Rubber Powder Pulverizer-→Rubber Powder
1. Single Hook Debeader LSJ-1200
Use:Pulling out the wire loops from the mouth of waste tires.
2. Tire Cutter QDJ-1200
Use:Cut the whole waste tires into small parts
3. Whole tire shredder ZPS-900
Use:This machine can directly crush tires smaller than 1200mm tires. At the general temperature, can be put directly crushed into 50 * 50 mm block, so the next rotating can grind into 10-30 meshes or wire and fiber separation equipment.
4. Double Rolls Rubber Crusher XKP-560
Use:Mainly used for crack large rubber blocks into 0-30 mesh small rubber granule
5. Fine Rubber Powder Grinding Machine XFJ-280
If you want 30-120mesh rubber powder, the rubber powder grinding machine is needed.
Rubber Crusher Parameter
| Technical parameter \ Type |
XKP-400 |
XKP-450 |
XKP-560 |
| Front roll diameter(mm) |
400 |
450 |
560 |
| Rear roll diameter(mm) |
400(Groove roller) |
450(Groove roller) |
510(Groove roller) |
| Working length of rolls(mm) |
600 |
650 |
800 |
| Front roll surface speed(m/min) |
17.32 |
23.2 |
25.56 |
| Friction ratio |
1: 1.38 |
1: 1.38 |
1: 1.30 |
| Max. nip(mm) |
8 |
8 |
15 |
| Motor power (kw) |
45 |
55 |
75 |
| dimension(L× W× H)(mm) |
3950× 1800× 1780 |
4770× 1846× 1835 |
5064× 2284× 1978 |
Detailed Introduction:
1,Notes for using tire cutter:
a. Inspect the knives frequently, if appear obvious blunt, it should be maintain timely, and the service is 2-3 years.
b. the oil in hydraulic station should be filtered and changed regularly. Generally filter once every one and half year.
c. Wearing parts: rubber seals, delivered with another set when ship the machine to the buyer.
2, Whole tire shredder ZPS-900
Use:
This machine can directly crush tires smaller than 900mm tires. At the general temperature, can be put directly crushed into 50 * 50 mm block, so the next rotating can grind into 10-30 meshes or wire and fiber separation equipment.
Feature:
This machine is a compact structure, advanced technology, low energy consumption, high efficiency, smashing off the test room for the structure, maintenance is particularly convenient; tools with carbide surfacing technology, high hardness, high wear resistance, and repeated repair using, so has a longer service life; rotary screen for the lattice structure of steel mesh, blanking large area, enabling the screening of qualified rubber. After the partition of large tires can achieve the effect of the same!
Mechanical description: the tires of 800mm diameter and rubber ring can directly be broken into 50*50 mm of rubber block.
3. Double Rolls Rubber Crusher XKP-560
Use:
Mainly used for crack large rubber blocks into 40-50mm small rubber blocks.
Technical parameters:
Structure: The rollers adopt alloy cold hard cast irons with wear-resisting, durable characters. The mill flour is with teeth, high groove.
The configurations of our XKP-560 rubber cracker are nylon bush grease lubrication and hard gear surface reducer with lower noise and longer service life.
Our crackers are designed humanized with nice operating platforms, all the wires will be connected well from controlling system to motor. When using the machine, the customers just need to connect directly to the power.
Packaging:
Equipment painting completed before delivery, and then wrapped with stretch film, avoid rubbing the paint off the surface, wooden packaging can be customized, key parts, such as electronic control box, will be wrapped by shockproof packaging materials, and then packed in wooden cases.
FAQ:
1. What does your factory do regarding quality control?
We pay much more importance to quality control from the very beginning to the end of production. Every machine will be fully assembled and carefully tested before shipment.
2. What's the machine quality guarantee?
Quality guarantee time is one year.We choose world famous brand components to keep our machine in perfect working condition.
3. Are you able to give installation and commissioning overseas?How long time will it take?
Yes, we can supply overseas service and technical support but customer needs to pay for the cost of the installation. Small machine usually takes within 2~3 days. Big production line usually takes about 30 days.
4. How can I trust you to deliver the right machine as I ordered?
We will absolutely deliver a good quality machine as we discussed and confirmed in the order. The core of our company culture is innovation,quality,integrity and efficiency. Also we have had many good cooperation with world famous rubber production manufacturers.
If you come to our factory, we can show the user around us.
5. How can we go to your side?
We are located in Qingdao City, Shandong province, China. The name of airport is Qingdao liuting airport. We will pick up you at the airport.
Our Services:
♦ Our engineers can design target machines for customers and send them the drawing to confirm. We are always on the side of saving your cost.
♦ In the process of production, we will take photos and send to customers for their track the progress.
♦ Documents such as packing list, commercial invoice, and bill of lading etc. will be sent after the delivery.
♦ We could supply free English foundation DWG, installation drawing, user guide, maintenance manual and part drawing.
♦ We supply overseas engineer service and help to train your workers to operate the machine.
Welcome your inquiry and visiting our factory!
Audited Supplier 
){kind=link}